Building wood gear clocks since 1971

Introduction Stains & finishes Parts List Page 1 Page 2 Assembly Page 1 Page 2 Page 3 Page 4 Trouble Shooting
						Staining & Painting Staining The parts can be stained before they are removed from the boards or hung from wire hooks. Use a rag, roll into a ball and gently dab the boards with a minimum of wax, or stain. Painting It is recommended that 1 or 2 coats of sealant be applied before painting. Whatever method you choose, use very sparingly, several thin coats are much better than one thick one.

These pages and all contents are Copyright © 2000 Moving Graphics